Categories ,


These internal gear pumps are extremely well suited for light, medium and intermittent service handling a variety of liquids. The smaller sizes C, F, FH are constructed for heavier duty service. Mechanical seal equipped pump models in sizes C, F, FH, G, H, HL are available with Underwriters label for handling fuel oil. Model numbers for these pumps must be designated by a suffix -X. UL listed models can be equipped with integral relief valve. Viking’s unique and unusually simple pump construction makes it adaptable to many diversified installations. The pumps possess excellent vacuum
characteristics and will operate and prime at suction lifts up to 25 feet, depending upon the vaporization point of volatile liquids. Because of the cushioned action in providing a continuous and steady stream of liquid without splashing, pounding, foaming or churning, the Viking pump is adaptable to an unlimited number of industrial applications.

• Relief Valve on Casing or Head: The integral pressure relief valve on casing or head permits by-passing of liquid from discharge back to suction side of pump. Reverse valve when reversing pump rotation on large pumps. Small pumps with relief valve built with right hand suction as standard.

• Steam Jacketed Head: Jacketed head or plate permits temperature control of the liquid being pumped. Jacketed plate available on G through LL size pumps. Jacketed head available on Q through N sizes. Relief valve not available with jacketed head or plate. For complete jacketed pumps, refer to Catalog Section 1464.

• Upright, Opposite & Right Angle Ports: C, F and FH size pumps are furnished with upright port casings: G size pumps have opposite port casing and H, HL, K, KK, L, LQ, LL, Q, M, N size pumps have right angle port casings. Right hand port determined by location of side port when facing pump from shaft end.

• Mechanical Seal: All pumps are available with packed stuff­ing boxes. Mechanical seals are available on C, F, FH, G, H, HL size pumps as standard. The seal is a rotary type packaged unit that is simple and self-adjusting. It works WITH rather than against pressure.

Industry application include Plastics, Abrasives, Sealants, Adhesives, Agricultural, Asphalt, Biodiesel, Brewing, Beverage, Chemical, Chocolate, Ethanol, Fats & Oils, Fiber, Food, Fuels, Fuel Oils, Oil Production & Refining, Paints & Coatings, Personal Care Products, Pharmaceuticals, Polymers, Polyurethane foam, Printing Inks, Pulp & Paper, Refrigeration, Rubber, Sugar, Soaps & Detergents, Water Treatment, Wind Power.

Dimension VIKING FH-432


Port Size   0.5”
Port Type  NPT
Port Orientation  Top
Externals  Cast Iron
Seal Type  Mechanical Seal
Seals  Buna-N
Flow Min  0 GPM
Flow Max  3 GPM
Pres Max  250 PSI
Valve  Relief Valve
Gears Rotor Idler  Steel / Steel
Shafts  Steel
Idler Pin  Nitralloy
Idler Bushing  None
Shaft Bushings  Carbon Graphite


There are no reviews yet.

Be the first to review “INTERNAL GEAR PUMP VIKING FH-432 Series”

Your email address will not be published. Required fields are marked *

ขอใบเสนอราคา/Request a quote

ชื่อ/Name *
Email *
เบอร์โทรศัพท์/Phone number *
บริษัท/Company *
บ้านเลที่ ซอย ถนน /Address *
จังหวัด/Province *
แขวง/ตำบล/Sub-district *
รหัสไปรษณีย์/Postal Code *
เขต/อำเภอ/District *
ประเทศ/Country *
สอบถามข้อมูลเพิ่มเติม/Ask us any questions *